1 / 3
Protective magnetic jaws for clamping – length 140 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To clamp sensitive components in the vise without causing damage, I designed these magnetically held protective jaws.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The protective jaws are mirror-symmetrical and feature a positioning tab for alignment with the vise jaw. To ensure a flush fit with the top surface of the vise when clamping flat or small parts, the tab can be oriented either upward or downward, depending on the application.
Part list:
- protective jaw | quantity: 2
- magnets ø10x2mm | quantity: 16
Print instruction:
To prevent breakage within the layer when clamping in the prismatic recesses, I recommend printing the protective jaws flat. This results in greater structural stability.
- material: PETG or similar
- material support: PLA (in case of 1 print head, PETG is also fine)
- supports: required
- layer height: 0,25mm or 0,32mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required