1 / 3
Protective magnetic jaws for clamping – length 140 mm — image 1
1 / 3

Protective magnetic jaws for clamping – length 140 mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

To clamp sensitive components in the vise without causing damage, I designed these magnetically held protective jaws.

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
121
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

The protective jaws are mirror-symmetrical and feature a positioning tab for alignment with the vise jaw. To ensure a flush fit with the top surface of the vise when clamping flat or small parts, the tab can be oriented either upward or downward, depending on the application.

Part list:
  • protective jaw | quantity: 2
  • magnets ø10x2mm | quantity: 16
Print instruction:

To prevent breakage within the layer when clamping in the prismatic recesses, I recommend printing the protective jaws flat. This results in greater structural stability.

  • material: PETG or similar
  • material support: PLA (in case of 1 print head, PETG is also fine)
  • supports: required
  • layer height: 0,25mm or 0,32mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: not required
  • enclosure: not required

Tags