Fan mount for increasing the efficiency of convectors/heatpumps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The fan mount increases the efficency of convector heaters.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The project is not yet finished and some parts are missing including the source code of the control. The source code will be published on Github. Please be patient.
The fan mount increases the efficency of convector heaters, thereby reducing the flow temperature of heating systems, which leads to increased efficiency of heat pumps. The whole fan mount system consists of
- fan mount for 135mm depth convector and a 120mm fan (see suffix: 135-120). Additional versions will be made public, maybe also in fcstd format.
- frame ends with prepared holes to mount for the electronic (hole distance 60mm). The holes are prepare for M3 thread inserts.
An ESP32 will be used as controller on a seperate PCB, which connetcs the fans (with optional ARGB) and temperatur sensors (DS18B20).
To fix the fans to the mount the holes are prepared for M3 and M4 thread inserts (here Ruthex).
- M3 for the fixation of the magnets (10x10x3mm with M3 counter sinkhole). Depending on the strength of the magnets and weight of the system up to 6 magents can be attached for each fan mount.
- M4 for the fixation of the fan an the connections between the different parts