Swytch gen3 conversion bracket cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attempt to cover my very primitive swytch battery conversion wiring.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My swytch battery just die, it serve me well in the past 2 years. It was all good but one of the problem is milage. I never have a chance to experience power assist level 5 due to battery capacity, I figure I could use this chance to upgrade it to a bigger battery and continue to enjoy daily commune on my 30 year old bike, especially when I could skip traffic in rush hours.
This file is for the bracket only, figure out wiring yourself, basically just connect the red wire and black wire to a 36v battery and voila! (of course you need fuse and a way to secure wire, also make it water proof, make sure you know which side is +ve & -ve. Modify at your own risk) Easy enough to find reference online though.