4x5 Film holder for DSLR scanning
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to raise a 4x5 film above a light for scanning large format sheet film
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This item has a little ridge that fits exactly a standard sheet of 4x5 photographic film. These are generally rigid enough where they will lay flat in there.
The lip around it is generally smaller than the “dead” unexposed area created by most 4x5 film holder, so this do not cause your picture to be cropped more than necessary.
This is useful to be able to hold a negative suspended above a light table or light source, to then take a picture of it with a macro lens and a digital camera of some kind with a tripod or a copy stand.
Print it upside down, add a little bit of support for the lip that will overhang. I suggest organic supports then just paint on dots at the corners and the middle of the segments, that is enough to be able to bridge the gaps.
The example here was quickly printed on a Voron in black eSun ABS+ and a 0.6 nozzle, sliced with 0.2mm layers.