1 / 4
4x5 Film holder for DSLR scanning — image 1
1 / 4

4x5 Film holder for DSLR scanning

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A holder to raise a 4x5 film above a light for scanning large format sheet film

Rating
5 / 5
Likes
19
Downloads
103
Makes
2
Views
586
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This item has a little ridge that fits exactly a standard sheet of 4x5 photographic film. These are generally rigid enough where they will lay flat in there.

The lip around it is generally smaller than the “dead” unexposed area created by most 4x5 film holder, so this do not cause your picture to be cropped more than necessary.

This is useful to be able to hold a negative suspended above a light table or light source, to then take a picture of it with a macro lens and a digital camera of some kind with a tripod or a copy stand.

Print it upside down, add a little bit of support for the lip that will overhang. I suggest organic supports then just paint on dots at the corners and the middle of the segments, that is enough to be able to bridge the gaps.

The example here was quickly printed on a Voron in black eSun ABS+ and a 0.6 nozzle, sliced with 0.2mm layers.

Tags