Raspberry Pi IR Camera Back Enclosure with Cutouts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design did not include cutouts on the back for the screws that mount the IR modules to the camera. This…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The original design did not include cutouts on the back for the screws that mount the IR modules to the camera. This required the user to bend the front faceplate around the camera to get it to screw down.
To fix that, I created 2 models. 1 model is slightly larger than the original to accommodate the screws. The other model contains cutouts for the screws so it will sit flush.
Print Settings
Printer:
FLSUN Super Racer
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15%
Filament:
Amazon Basics PLA
White
Category: 3D Printer Parts