Button Battery Gridfinity Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various Bins for Button-sized batteries. Versions with magnets, no magnets, stackable, or non-stackable.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Various battery holders for small batteries. All on 1x1 gridfinity bins. There are versions of each that are stackable or non-stackable … along with magnets or no-magnets.
I printed these all with PLA - usually on a 0.2mm layer height and 5% infill.
CR123A
CR2032
LR1130/AG26 (Thinner but similar to CR2032)
LR44/357/76
Tiny Batteries for watches/hearing aids/etc. - AG5, LR626/621, and LR516/521/526
Please comment if there is a battery not listed in these models and I can happily create more for whichever you may need. Many of these also go by a ton of different names so double check the battery you need doesn't already fit in one of the types above.