Wyniki wyszukiwania: 1x1

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters-CP 21)

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Multiboard 1x1 Bracket - Bolt-Locked Inserts

A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license

Kawaii Halloween Friends Faceplate Set for GEN2 Decor Drawers 1x1 (Single) | Quick Swap

Quick swap faceplates designed for the GEN2 Decor Drawers by Jerrari Print settings I used (included in 3MF) 0.4mm nozzle 0.2mm layer height 15% infill (gyroid) Seam position: Back (rotate faceplate so seams are on the underside of the…

Gridfinity Chapstick Holder 1x1x4U (Quick Print)

1x1x4U Gridfinity Lite Bin for holding Chapstick Quick Print - No Magnet or Screw Holes Printed in 34 minutes! Holds 4 standard size chapstick tubes Printed on Ankermake M5 with PLA+ with a 0.4mm nozzle at Fast speed Print Settings: 0.3mm…

Gridfinity - Weller Solder Tip Holder (1x1)

#gridfinity, #ZackFreedman

Gridfinity Base Risers/Spacers (1x1)

Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…

Gridfinity 1x1 box to hold 4 Creality nozzles.

Gridfinity 1x1 holding 4 Creality nozzles in the square plastic tube, might also hold other brands or other objects: Fitting square sizes: 12.5x12.5mm ~ 13x13 mm

Minimal 1x1 Gridfinity Holder for Wire Stripper

A Gridfinity holder made for "JOKARI Super 4 Plus" wire stripper / automatic insulation stripper with minimal footprint of 1x1. It probably also fits the Knipex one (12 62 180). Other holders I found used at least a footprint of 1x3. This…

Lego compatible 1x1 Brick

A Lego compatible 1x1 brick.

1x1 Multibin Top Volcano Nozzle Holder

1x1 Multibin Top remixed to hold 16 Volcano nozzles

SnugFit for Gridfinity Hexagonal Bit Holder (1x1, 6.35mm)

Make your bits fit deeper and tighter

1x1x1 Building Block

The 1x1x1 building block is a 3 inch by 3 inch by 3 inch (76mm by 76mm by 76mm) cube intended to be used as a fill in size for commonly found cardboard building blocks. This is meant to be a child's toy to help further bolster creative…

Floor - Tile - Stone - Diagonal Stacked - Medium - 1x1 (SQUARE) - Center 1.3 (DEGRADED) - 3D Modular Dungeon Tile - DnD Town Minis (www.dnd.town)

Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…

USB TP4056 frame for 1x18650 battery holder

Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…

1x1x1x1 action figure

HE here and he's domanting the round

REWORK Articulated 1x1x1x1 Roblox Figure (Classic and Forsaken)

1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…

1x1 (part 3005) LEGO compatible brick

Let me know if I have to change anything.

Cosplayer C00lkidd From Forsaken, 1x1x1x1, John Doe, And Slasher

Credit to Mr.Make_it for the base body

Gridfinity 1x1 2x Sony NP-FW50 Battery Storage

A Gridfinity 1x1 NP-FW50 Battery Holder. For those who just need two.

X-ACTO Knife and spare blades holder Gridfinity 1x1

Holds X-ACTO knives (one large and one small) and 10 spare blades. Compatible with Gridfinity and uses a 1x1 space. Prints without supports and uses default printer settings. Use 5mm x 2mm magnets for the blade holders.

Small Containers 1x1 – Wall Rack System By Xavi Vedoya

Modular Wall Rack System – By Xavi V This fully modular wall rack system is designed to help you organize and store a variety of items, including tools, electronics, wires, and small parts. Its components snap together securely, making…

Lego Compatible Brick 1x1 3005

Lego Compatible Brick 1x1 3005

[Gridfinity] 9 SD Cards holder 1x1x4

It's my first Gridfinity project, if you want to, can you send me a picture of that creation printed and tell me if it is fully functional ! Thanks !

Elegoo Centauri Carbon - Nozzle Holder - Gridfinity 1x1

Elegoo Centauri Carbon - Nozzle Holder - Gridfinity 1x1 - 16 Nozzles

1x1 CU - LR44 - Multibin Top

This is a 1x1 Multibin Top to hold up to eight LR44 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…

1x1 CU - CR2450 - Multibin Top

This is a 1x1 Multibin Top to hold up to five CR2450 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…

1x1 CU - CR2032 - Multibin Top

This is a 1x1 Multibin Top to hold up to six CR2032 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…

1x18650 Power Bank Holder Stand for Handheld Flashlight

This is a 3D printable holder/stand designed to convert a 1x18650 power bank into a convenient handheld flashlight or lamp. The model is optimized for printing with PETG or PLA filament. Print it in the orientation shown in the photo,…

BatteryHolder_RSPRO_2378296_1x1220

BatteryHolder_RSPRO_2378296_1x1220

Gridfinity 1x1 Jar with Screw Lid

Gridfinity bins are great if they stay upright, but they can spill if turned upside down. This jar adds a screw-on lid for securely keeping little things in there. 1x1 base, 6 units tall (including base). The f3d file includes a parameter…

Gridfinity Bin, 1x1 triple divider w/ printable label insert

Remix of @Pred 1x1x6u gridfinity bin, with a triple divider option. I made this option so it would fit various M2 and M2.5 hardware that the available 1x2x6 triple divider was just too large for. This provide a smaller solution. Please…

1x1

1x1

Webbing T-Piece 2x20 mm - 1x10mm

A simple T-Piece that can be used for attaching a 10 mm webbing perpendicular to a 20 mm webbing. I used it for a chest-strap of a cycling musette bag, but it may be useful for other MYOG purposes as well.

41 Slot MicroSD Card Holder for Gridfinity 1x1x3

AA Batteries Holder - 1x1x0.5 LU - Multibin Insert

This is just a basic AA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…

Gridfinity 1x1 Divider Bin With Snap-In Extension for Modern Case

I really liked the Modern Gridfinity Case by Matthew ( https://www.printables.com/@unrepentantgeek ), but I also really liked the bins with printable labels by Pred ( https://www.printables.com/@Pred_457770 ) which I was already using for…

Gridfinity Bit holder bin 1x1 Stackable

A simple stackable 1x1 gridfinity bin for 25mm hex drive bits. It can hold 17 bits.

Multiboard 2x1x1 labeled quad divided insert

Insert with labels

Gridfinity 1x1x8 AAA battery holder

I found Xavierly's set of Gridfinity battery holders really cool, but i wanted to stack baseplates and other things larger than 1x1 on top of them, so i made the height of the AAA holder (was 7U) to match the height of the AA (8U). So i…

Gridfinity center drill holder / stand 1x1

I printed this in PLA+.. Tip: Check the dimensions in your slicers measuring tool before printing to make sure you will get what you expect.

Flashforge AD5X Extruder Head Bambumod P1X1

Модель каретки FF AD5X для нагревателя Bambulab P1/X1. Из-за того, что положение корзины сброса отходов и её шторки может быть разным у каждого конкретного экземпляра AD5X, в проекте несколько версий, различающихся положением хотенда по…

Gridfinity - Tall Thin Things Holder 1x1x7U

The base model is great for things that fit tightly or are short, but thinner or taller things didn't work quite so well. Simple change, increase the depth of the holes.

Gridfinity Swiss Army Knife Holder 1x1

The most versatile gridfinity bin yet, store multitudes of tools within your Swiss Army Knife and give it a dedicated home at your workstation. This holds a Victorinox Swiss Army Knife Model: Spartan1.603.

LEGO Baseplate 1X1

I will say it directly. This is the most revolutionary, the most important and the most useful lego piece in the history of forever. It is a Baseplate 1X1. Why would you want to use 32 x 32 baseplate, or a 48 x 48 baseplate, or even a 32…

Gridfinity 1x1 screwdriver hex bit holder

Gridfinity 1x1 screwdriver hex bit holder

Gridfinity Base Plates Pack 1x1 to 10x10 – Standard 42mm Modular System

📦 Complete Gridfinity Base Plate Pack This pack includes a full set of Gridfinity base plates from 1x1 to 1x10 , designed according to the official 42mm unit standard . Perfect for: drawer organization workshop setups storage optimization…

Cardboard Gridfinity 1x1 lid with label

Variant of the Gridfinity Cardboard 1x1 Lid with a small area to stick a label. Doesn't allow stacking other containers on top.

Mini LEGO 1x1 Stud

Easy print

1x1 Gridfinity Holder for the Bowden Speed Loader

To save Gridfinity space, I created this 1x1 Gridfinity Holder for the Bowden Speed Loader. By mounting the speed loader vertically, this should work for any of the remixes of the original Bowden Speed Loader. Links:…

GRIDFINITY - Support BATTERY SONY NP-FZ100 - SONY A7 - 1x1

Voici un support GRIDFINITIRY pour batterie NP-FZ100 pour les boitier Sony Elles ont toutes été imprimé en PLA et avec un remplissage a 5% de type gyroïde Il y'a un petit gravage "BATTERIE" -------------- Here is a GRIDFINITIRY battery…

Jumper Wire Connector 1x1

I designed this connector to fix together two male jumper wires similar to this: It is very helpful for small circuitry. Usually when you don't want to soldier a pair of wires to a micro controller, you can connect a female jumper wire to…

1x2 units, full height, 1x1 grid Stackable Insertbox Sortimo

Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Gridfinity Vase Mode - 1x1x9 and 1x1x12

Taller versions of @jake_worrell's Gridfinity vase mode bin.

[ALCH] 1x1x40 4 subdevisions ModuBOX

This is a 1x1x40 with 4 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…

[ALCH] 1x1x40 2 subdevisions ModuBOX

This is a 1x1x40 with 2 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…

MMSS 1x1 Module - Nozzle Wiper

This module, for 4 Nozzle Wipers , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. Pre-made modules, here there are several, and many are…

MMSS 1x1 Module - MicroSD

This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……

Hex Bin Gridfinity 1x1x5

This Hex Bin offers thicker walls for a more rugged tray. 1x1x5 Gridfinity

Hex Bin Gridfinity 1x1

This Hex Tray offers thicker walls for a more rugged tray. 1x1 Gridfinity base plate.

Gridfinity 1x1 for support base for box of water-soluble tablets (such as vitamins/Effervescent)

About: Gridfinity 1x1 support base for box of water-soluble tablets (such as Effervescent). Additionally those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base…

Gridfinity 1x1x3 Jake - Bambu Nozzle

For Bamboo Lab attachments from third-party manufacturers. I liked the model (https://www.printables.com/model/542631-bambulab-3rd-party-gridfinity-nozzle-holder/files), but it did not have the ability to put something on top and there…

Gridfinity 1x1 Clipper lighter holder with magnet holes

An easy gridfinity 1x1 model for normal clipper lighter (not the smaller ones!).

Gridfinity 1x1 tealight candle holder with magnet holes

A simple model for tealights (~38mm) with a gridfinity base for four candles.

Desk Top Shelf Brackets for 1x10 or Larger Boards

Brackets for building a DIY shelf out of a 1x10 or similar shelf board. Designed for X1C print bed (256mm * 256mm). *please note the slicer modifiers to make the bracket/screw part much strong I wanted a shelf that could specifically hold…

Stackable gridfinity LR44 battery holder, 10 pc (1x1x3) with built in label

The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…

Gridfinity 1x1x3u Battery Holder CR2450

While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…

Gridfinity 1x1 bin

42mm Grid Base

1x1 Gridfinity Taylor Seville Magic Clip (Mini, Small, Large) compatible holder

A 1x1 Gridfinity compatible holder for all sizes of Magic Clips! One bin works for both mini and small with the other bin for large. For the small bin, omit the bottom row for small sized clips, but you can use all 4 rows for mini sized…

1x1 Gridfinity 8 Weighted Washer holder. (2in / 50mm)

Having some weights on large sheets of fabric can be helpful when making measurements, using patterns, making marks, or cutting with a rotary blade. This is a simple 1x1 gridfinity bin that holds 8 large inexpensive washers. They are…

Gridfinity, 4x-1x1, 20 Heights, Magnet Holes

1x1 bins split into 4 equal sections. Available in 20 different heights. With magnet holes. No top. Not stackable. Great for tiny or long narrow items such as cotton swabs, tooth picks, tweezers, brushes, glue tube, pens, cutters,…

Gridfinity 1x1x3 Glue Stick Holder

Small Gridfinity bin for Holding up to two Glue Sticks with a maximum diameter of 21mm.

1x1 Gridfinity for Basic Debur tool

I couldn't find a debur tool stand I liked for the cheap debur tools. This one is only 1x1 with just enough height to keep the tool held firmly. (Note, the line in my print was just my printer messing up for a layer.)

Gridfinity, 1x1, 20 Heights, Magnet Holes

1x1 bins available in 20 different heights. With magnet holes. Not designed for stacking or covers. Easy print, no supports needed.

AmazonMediumBox_RAK_1X18650

Single battery version. Older design (done in TinkerCAD). Meshtastic USB Powered Node Enclosure Carrier Mounts a RAK Wireless WisBlock Starter Kit into the Enclosure linked below from Amazon. RAK Wireless WisBlock Meshtastic Starter Kit:…

Gridfinity 1x1 TorchBlue Butane Torch Lighter

Gridfinity 1x1 holder for butane torch. Measures 27mm diameter and 75mm depth.

Small 1x1x2

use supports. puzzle is fully screwless you need a force when assembling puzzle. Puzzle size: 10x10x20mm Category: Puzzles

Gridfinity AirPods Pro 1x1

It looks great in dual color! Print instructions These tips can maybe help Speed on first layer : 50% (or less) (To ensure good bed adhesion and perfect fit) Infill : 15% Lightning Perimeters : 2 Supports : NO supports needed

LEGO Half Circle Round Flat Tile 1X1

This is a LEGO Half Circle Round Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 6131655, but it does not need to be white.

Gridfinity Deep 1x1 Bin

This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…

Gridfinity 1x1/1x2 bin 2x divider Add-on for cases

2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…

IKEA furniture MOPPE 21x17x12 cm

I would appreciate a lot if you could support me giving a like and downloading, thank you guys.

LEGO Quarter Circle Round Flat Tile 1X1

This is a LEGO Quarter Circle Round Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 6172366, but it does not need to be white.

Gridfinity 1x1x2 Bitcoin Holder

Gridfinity 1x1x2 Bitcoin Holder. Remixed from Gridfinity Pressure Fit Collection by @Software2

Gridfinity 1x1x3 Mini-Superglue Storage

Holds 7 Mini-Superglue (Harbor Freight “Future Glue”) tubes. Tubes are ¾" wide and 2" tall (0.03oz / 1g).

1x1 6u gridfinity bin with curved ramp bottom

A remix with a curved ramp on the bottom to more easily get screws out.

Lego 1x1

Best lego 1x1 brick

Gridfinity Eraser + Pencil Sharpener Holder 1x1

Quick and easy Gridfinity Holder for 2 Erasers and a Pencil Sharpener :)

Gridfinity 1x1 bin for (Gopro) camera screws

Simple gridfinity holder for camera screws, nothing fancy. Printed with 0.4mm nozzle, 0.2mm layer height, PLA.

Gridfinity 1x1 Flux Syringe Holder

Prints very well in PETG with 10% gyroid infill and 3 outer layers.

1x1x1 CM MAB CUBE

1x1x1 CM MAB CUBE

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters-CP 21)

Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download

Learn the basic 1x1 - 2nd grade elementary school

Have some fun while learning the basic 1x1. Each icosahedron has all problems from 1x1..1x10, the next 2x1..2x10, etc. Problems and solutions are on opposite sides of the icosahedron. Made with onshape.com, link to the model . — 10…

Kirby Pixel art 1X1 math game

The model is printed completely from PLA. The models are completely assembled in STL.

Gridfinity Staple Remover Tool 1x1 (Soennecken Enthefter)

A 1x1 Staple Remover Holder. Specially made this for the one from Soennecken, maybe fits others too. Please share your Makes, give a thumbs up if you liked it or let me know what i can improve <3

Lego Brick 1x1

🧱 Mattoncino LEGO Compatibile 1x1 Questo file STL ti permette di stampare un mattoncino compatibile con il formato LEGO 1x1 , perfetto per progetti personalizzati, modellismo, prototipazione o semplicemente per divertirsi. Il design è…

Multiboard 2x1x1 Drawer inset quad divided

This Modal fits Perfect in an Multiboard Drawer with the 2x1x1 Dimensions. It divides the Drawer in 4 equally sized sections

Multiboard 2x1x1 Drawer Inset Double Divided

This Modal fits Perfect in an Multiboard Drawer with the 2x1x1 Dimensions. It divides the Drawer in 3 equally sized sections

Multiboard 2x1x1 Drawer Inset Divided

This Modal fits Perfect in an Multiboard Drawer with the 2x1x1 Dimensions. It divides the Drawer in 2 equally sized sections

Lego Brick 1x1 Plate

Mattoncino LEGO Compatibile 1x1 Plate Questo file STL permette di stampare un mattoncino plate 1x1 compatibile con il formato LEGO. La sua forma piatta e sottile è perfetta per dettagli e strati sottili in costruzioni personalizzate.…

1x1 Gridfinity Swtich Pokeball controller holder.

Easy print. Doesn't need much support.