3D printed 1500mm RC Glider, LW-PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed 1500mm RC Glider
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
We present our own custom design of a remote-controlled glider. The model was 3D printed using LW-PLA.
General specifications:
Wingspan: 1530mm
Length: 1400mm
Height: 220mm
Total weight: (+/-) 515g
3D Printer min. bed size: 220x*220y*220z(mm)
CG - 80 mm behind the leading edge at the wing mid-span. It may need to be adjusted after the first flight.
Materials needed:
LW-PLA filament, PLA+ filament,
Nylon filament (optional) - for gluing into the wing (reinforcement)
Carbon rod 1.8mm 1000mm – 1x
Steel rods 1.2mm (Servo-hooks) 1000mm – 2x
Neodymium magnets: 10x3mm or 10x10x3mm – 12x
10x5x3mm – 2x
Senus medium density glue(blue) + activator
Rubber band
Motor: C2826 1350KV
ESC: MANTIS Slim ZTW-32Bit ESC 30A
Propeller: Foldable propellers 7.5x4
Battery: Lipol HV Tattu 450mAh 3S 11.4V
Servo motors: EMAX ES08MAII 12g or SG90 9g – 2x
Controller: FLYSKY FS-i6x 2.4G 6/10CH AFHDS 2A + receiver IA10B
Inside .zip:
STL files
3MF files
Manual with print settings
In our profile you will find test files of our projects.
A glider designed for flying/gliding on calm, windless days.
Presentation shown in the video on Youtube:
If you have any questions or problems, please contact us: [email protected]