Pi Ribbon Cable Retainer Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After managing to break several ribbon camera clips over the span over a couple weeks, I decided replacing the clip…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After managing to break several ribbon camera clips over the span over a couple weeks, I decided replacing the clip would be easier than replacing the entire connector. Not nearly as secure (yet) as it doesn't go into the side brackets, but it will fit in the hole and hold the ribbon in place.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
15%
Filament: Duramic PETG Black
Notes:
This part is tiny and prints in a couple minutes. It's tolerances are microscopic, so the smaller the nozzle and layer height, the better.
Category: Parts