1 / 6
Xikestor SKS8310-8X rackmount 1U Ears for 10-inch rack — zdjęcie 1
1 / 6

Xikestor SKS8310-8X rackmount 1U Ears for 10-inch rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Xikestor SKS8310-8X switch includes metal ears for 19-inch 1U rackmount. I wanted to place in a 10-inch rackmount

Ocena
0 / 5
Polubienia
8
Pobrania
70
Wydruki
1
Wyświetlenia
485
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

Ears for 10-inch rackmount

The mounts on the switch are symmetrical and so are the ears. So print two of the included 10-inch ear model (one for each side). Made countersink holes, so the screw head can be flush with ear bracket.

Probably will fit other Xikestor switches if they have the same pattern of three screws/side for rackmount ears. Since it is designed in OpenSCAD, should be trivial to support other (smaller) widths for 10-inch rackmount or 19-inch rackmounts.

Printed in PETG with 4 wall loops and dense infill (~60%).

Also needed:

  • 6 count of M3 8mm screws
    • The M3 5mm screws that came with the switch for the included 19-inch rackmount metal ears aren’t long enough for the 3D-printed ears, since the plastic ear is thicker than the metal ear.

[3dprintering/projects/mini-rack/xikestor_sks8310-8x at main · idcrook/3dprintering]

Tagi