Xikestor SKS8310-8X rackmount 1U Ears for 10-inch rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Xikestor SKS8310-8X switch includes metal ears for 19-inch 1U rackmount. I wanted to place in a 10-inch rackmount
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 1
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Ears for 10-inch rackmount
The mounts on the switch are symmetrical and so are the ears. So print two of the included 10-inch ear model (one for each side). Made countersink holes, so the screw head can be flush with ear bracket.
Probably will fit other Xikestor switches if they have the same pattern of three screws/side for rackmount ears. Since it is designed in OpenSCAD, should be trivial to support other (smaller) widths for 10-inch rackmount or 19-inch rackmounts.
Printed in PETG with 4 wall loops and dense infill (~60%).
Also needed:
6count ofM3 8mmscrews- The
M3 5mmscrews that came with the switch for the included 19-inch rackmount metal ears aren’t long enough for the 3D-printed ears, since the plastic ear is thicker than the metal ear.
- The
[3dprintering/projects/mini-rack/xikestor_sks8310-8x at main · idcrook/3dprintering]