1 / 3
Nitrile Glove Box Wall Mount (22 × 11.5 × 6cm boxes)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for (nitrile) glove boxes. Made with 4mm screws in mind.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Simple wall-mounted holder for glove boxes. The design is tailored for boxes measuring 220 × 115 × 60 mm, but it may also fit other glove boxes of similar dimensions.
Printing recommendations:
I have printed this with these settings:
- Layer height: 0.2mm
- Walls: 3
- Infill: 25% (but less might suffice)
- Material: PLA