Elecraft KH1 Kneeboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple kneeboard for the Elecraft KH1 transceiver.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Edited 2/28/26 with new links for the items needed.
I am open to improvements and tweaks - please contact me directly or leave a comment.
I designed this KH1 kneeboard for some friends in the amateur radio CW community.
In addition to the printed part, you'll need the following:
1.5"x6' of strap (enough to make 2 straps):
1 x Adhesive Metal Plate:
18" of 1/8" or 3mm shock cord:
Metal Plate: https://a.co/d/fllIimQ
Strap: https://a.co/d/301TOuj
Shock Cord: https://a.co/d/7hhgtWZ
If you make the fender washer version, you'll need one of these: https://a.co/d/fSxIisK
It should be printed in PCTG, PETG, ABS, ASA or other sturdy filament.
My suggested settings:
Walls: 3
Infill: 25%
Infill Pattern: Cubic or Gyroid