Giant spider with web or wall attachment provisions, scaled and ready for K2 plus.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This great spider needed a way to hang from a web or the wall
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I placed every file in an Orca .3mf project and scaled them up 205% to max out a K2 plus. Set up and tested a thick wall vase mode profile for the K2 with a 0.8mm nozzle. Drew a foot with screw tabs and a zig zag slot, then added those to the rear 6 legs. The pincers were originally placed with too much cantilever so vase mode struggled. my cad wouldn't open in editable format so I got creative in the slicer. it may look funky but it works. the ball socket gets tight with the thick walls I laid down so I used a screw driver to spread the sockets in the thorax. I also included some gutter hooks and ground stakes to tie up a web on my house.