Giant spider with web or wall attachment provisions, scaled and ready for K2 plus.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This great spider needed a way to hang from a web or the wall
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 369
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I placed every file in an Orca .3mf project and scaled them up 205% to max out a K2 plus. Set up and tested a thick wall vase mode profile for the K2 with a 0.8mm nozzle. Drew a foot with screw tabs and a zig zag slot, then added those to the rear 6 legs. The pincers were originally placed with too much cantilever so vase mode struggled. my cad wouldn't open in editable format so I got creative in the slicer. it may look funky but it works. the ball socket gets tight with the thick walls I laid down so I used a screw driver to spread the sockets in the thorax. I also included some gutter hooks and ground stakes to tie up a web on my house.