Faceted Moroccan Quatrefoil - Frame for Flowers or String Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large Moroccan quatrefoil frame for hanging lights or foliage; prints flat in one piece on 350×350 mm beds.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
A lightweight, openwork Moroccan quatrefoil frame designed by hakkaisha for decorative displays. Use it as a stand‑alone hanging ornament or as a skeleton to wrap with fairy lights, flowers, foliage, or seasonal decor. Sized to print in one piece on large-format printers, it makes window and wall decor fast and simple.
Design Intent
- Purpose: Provide a flat, elegant quatrefoil “skeleton” that holds light string or other decorative materials.
- Target users: Makers and decorators who want an easy, reusable base for seasonal or everyday displays.
- Environment: Primarily indoor hanging (window, wall, mantel).
- Compatibility/size: Intended to print in one piece on a 350×350 mm build area (e.g., Voron 2.4 350, Prusa XL). Smaller beds can scale down or split in your slicer if desired.
- Constraints/trade-offs: Kept thin and lightweight for fast printing and easy hanging; not intended for heavy loads.
Features
- Clean Moroccan/arabesque quatrefoil outline for a classic look.
- Faceted segments create multiple tie‑off points for string, lights, or zip ties.
- Flat, one‑piece print; pre‑oriented to lay flat on the bed.
- Lightweight open structure for windows and backlit displays.
- Scales well in the slicer to fit your space or printer.
- Works with common materials (PLA, PETG) and typical FDM settings.
Assembly
Hardware:
- Hanging: string, fishing line, or ribbon.
- Optional attachments: fairy lights, floral wire, small zip ties, or twist ties.
Steps:
- Print flat as provided; no supports needed.
- Lightly clean up edges if necessary.
- Thread your hanging line through any corner/segment and tie a secure loop.
- Wrap lights or foliage around the faceted segments, using cable ties or wire as needed.
- Hang on a hook, suction cup, or adhesive tab rated for the total weight.
Print tips:
- Layer height ~0.2 mm, 2–3 perimeters, 10–20% infill are reasonable defaults.
- PETG is a good choice for window areas with more sun/heat; PLA is fine for typical indoor use.
Safety & Usage Notes
- Not load‑bearing; do not hang heavy items from the frame.
- Keep long cords/strings and small fasteners away from children and pets.
- Avoid high heat or direct flames; most printed plastics can deform.
- If placing in sunny windows, consider PETG and check adhesives/hooks regularly.
If you print this model, please share your make photos — I’d love to see what you create!
Support my work to help me create innovative designs and push creative boundaries. Your contribution fuels my passion and brings more unique creations to life!