A creepy stylized tree w/ printability fixes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was looking at the top models and thought I'd remix this one
- Ocena
- 1 / 5
- Polubienia
- 12
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
halloween tree
I'm kinda being silly but I thought I'd take a stab at a “fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning supports off of this would be a pain - esp from inside the mouth but with enough patience it could be done.
Original model:
https://www.printables.com/model/1402055-a-creepy-stylized-tree-with-twisted-branches-hollo
What I did to the model:
I used a cylinder to plug the hole in the bottom and a UV sphere to plug the whole in the top then did a remesh to even out the geometry a shrinkwrap and then flattened the bottom. I also added a watermark for science and then sized it up to ~60mm in height which seems like a reasonable size but you can scale it however you want.