A creepy stylized tree w/ printability fixes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Was looking at the top models and thought I'd remix this one
- Rating
- 1 / 5
- Likes
- 12
- Downloads
- 70
- Makes
- 0
- Views
- 198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
halloween tree
I'm kinda being silly but I thought I'd take a stab at a “fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning supports off of this would be a pain - esp from inside the mouth but with enough patience it could be done.
Original model:
https://www.printables.com/model/1402055-a-creepy-stylized-tree-with-twisted-branches-hollo
What I did to the model:
I used a cylinder to plug the hole in the bottom and a UV sphere to plug the whole in the top then did a remesh to even out the geometry a shrinkwrap and then flattened the bottom. I also added a watermark for science and then sized it up to ~60mm in height which seems like a reasonable size but you can scale it however you want.