Scalable Antenna Cable Door Passthrough Crush-Preventing Strain Relief for 0.20” Dia. Coax Cable GMRS, HAM, FRS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to prevent antenna coax cable from getting crushed in a car door. Print in 95A TPU w/4 walls and 80% infill
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this model after my GMRS magnetic antenna cable kept getting crushed by my car door, even when I routed it through the softest locations.
Specs:
- Designed to fit 0.20” Dia. coax, but can be scaled to fit whatever size you need
- Material-95A TPU-HS
- Walls-4 is optimal
- Infill-80% rectilinear
- Orientation-print laying down flat on the bed with the opening upwards
Files included are the original SLDPRT file (created with the Maker version of solidworks, so my apologies if your version of SolidWorks cannot open it) and the STEP file, since STL's are dumb if anyone wants to remix or adjust the file resolution. If you expressly NEED the STL or 3MF, message me and I can see about getting it for you. Overall STEP files are more universal, and should be the new file standard in my opinion.