Adapter Dyson V8 to 38mm flexible hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found old flexible hose and decided to adapt it to the Dyson V8
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
Found old flexible hose and decided to adapt it to the Dyson V8 (or compatible).
This allows you to use Dyson V8 and then attach a hose to it (the direction is important). Then if the hose has a 32mm pipe with a metal pin lock on the end you may be interested in https://www.printables.com/model/1741402-32mm-vacuum-hose-with-metal-lock-pin-to-dyson-v8
The hose origin is unfortunately unknown to me (probably Philips?).
The diameter of the stiff part of the hose is 38mm after removing any excessive plastic parts.
I used https://www.printables.com/model/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter as a base and added wider pipe on top of it.
Please like, create makes and add comments also to the original model, thanks!
Dimensions:
pipe diameter 38mm
insert depth 40mm
Changelog:
2026.05.31 - additional photos and improved documentation
2025.10.05 - initial release
Print:
print vertically, supports minimal.
0.2mm layer 0.4 nozzle, 4 perimeters recommended (or all perimeters)
PETG recommended
Assembly:
read before assembly
remove any plastic fragments from the hose, make it smooth
heat up the part so it is more elastic - use hair dryer or hot air around 200C, this way it will be easier to slide it in onto the hose
put on the hose while it is warm
when it cools down then it will clamp on the hose without requiring any glue