Creality K1/K1C with CFS Purge Poop Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop Catcher for Creality K1C with CFS.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 242
- Wydruki
- 2
- Wyświetlenia
- 1457
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was looking for a poop chute to stop them just falling into the bottom of me printer but all the designs I saw involved cutting/drilling a hole in the back which i didn't want to do. There also isn't really room in the bottom for a tray when the bed is as low as it will go so I made this.
No drilling needed, just a bit of sticky velcro to hold it in place and when it's full just pull it out and empty it!!
I originally printed it in 2 parts although the top bit is optional but I have also uploaded it as one piece.
The outerwalls are 1.2mm thick so with a 0.4mm nozzle thats 3 layers (100% infill) printed upside down with tree supports just for the base of it, they are not needed for the front. I did mine with a 0.3mm layer height becasue its going to be hiding at the back, it doesnt matter if it doesn't look neat.
Printer: Creality K1C
Filament: Creality CR-PETG
Nozzle 0.4mm
Layer height: 0.3mm
Supports: Yes for the bottom only
