Creality K1/K1C with CFS Purge Poop Catcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poop Catcher for Creality K1C with CFS.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 244
- Makes
- 2
- Views
- 1,471
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I was looking for a poop chute to stop them just falling into the bottom of me printer but all the designs I saw involved cutting/drilling a hole in the back which i didn't want to do. There also isn't really room in the bottom for a tray when the bed is as low as it will go so I made this.
No drilling needed, just a bit of sticky velcro to hold it in place and when it's full just pull it out and empty it!!
I originally printed it in 2 parts although the top bit is optional but I have also uploaded it as one piece.
The outerwalls are 1.2mm thick so with a 0.4mm nozzle thats 3 layers (100% infill) printed upside down with tree supports just for the base of it, they are not needed for the front. I did mine with a 0.3mm layer height becasue its going to be hiding at the back, it doesnt matter if it doesn't look neat.
Printer: Creality K1C
Filament: Creality CR-PETG
Nozzle 0.4mm
Layer height: 0.3mm
Supports: Yes for the bottom only
