Sturmkind drift curb set for 1:43 rc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of curb elements with different radii and angles + straight and end elements for RC e.g. Sturmkind Drift
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
rev.2 is even slightly smaller in height now and has internal pockets for the connection pins instead of cutouts from the bottom side to improve connection between elements.
Also Added a Track example that can be build with it.
____________________
This set of curb elements is used for RC purposes, mainly for the Sturmkind Drift racers, to build advanced race tracks. The curbs can be driven on by the racers with no impact on the car.
So far there is only few radii and angles, straight parts and end elements. R5+R36; R10+R41 as well es R15+R46 give a constant 280mm wide track perfect for the start and stop sticker to fit in between. Every element can be combined with the connection pin. push the pin in from the side to connect.
No support needed. I printed in PLA with litte infill.
Let me know if you need other radius or angles, I'm happy to add more variation upon request. Also I will gradually add more variation along with my own race track project.
Feel free to tip me if you like the design at paypal.me/DivBequ0 Thanks!