Aluminium Greenhouse Frame Connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3/4-way aluminium greenhouse joints. Print with brim, supports, and pre-drill holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
These connectors are replacement joints for classic aluminium greenhouses, typically from the 1980s.
They are designed to join aluminium tubes used in the frame structure and come in both 3-way and 4-way versions.
Perfect for repairing or extending older greenhouse frames where the original plastic fittings have cracked or become brittle over time.
When printing, a brim is recommended for better bed adhesion, and supports should be set to “from build plate only.”
It’s also recommended to pre-drill the holes where the screws will be inserted.
The exact screw positions vary depending on the greenhouse model and tube profile, which is why no pre-drilled holes are included in the model.
Print settings:
- Layer height: 0.15 mm or 0.20 mm (Both structural)
- Material: PETG or ASA
- Nozzle: 0.4 mm
- Infill: 25% - 100%
- Supports: From build plate only (Optional)
- Brim: Enabled (Optional)