Lectric XP4 Frontplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover that mounts on the front 4 bolts of your Lectric XP4. Add stickers, trap the cable, and hide the bolts!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I was requested to make a front plate cover for the Lectric XP4. Usually a basket would be mounted to the front 4 bolts, but you can instead print and use this cover. The cover should ideally be printed in ASA or ABS, but I found PETG works fine too (for now). I recommend ironing if you're going to place stickers on it but its not strictly necessary.
The main use is to make the front of the bike look nice, have a bit of customization with stickers, and to trap the cables that usually protrude at the front of the bike.