Weiterer Heizungsverstärker / another radiator booster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a booster for a heating radiator and to increases its efficiency.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a booster for a heating radiator because the forced airflow increases the efficiency of the radiator and more heat can be transferred to the surrounding air. (NOTE: If you have a heating energy measurement device sticking on the radiator, the usage of a booster is illegal in Germany). We use the booster in our living room and in our bedroom because both radiators have furniture next to them. The booster is designed to be placed on the floor, so if not running nothing influences the natural convection. If you want you can add an standard fan cover or dust filter.
I used standard 5x10 fan screws to fix the connection plates (e.g. fan screws).
To connect all 5 fans you may use a splitter like this PWM Fan Hub 1 To 5 Way or this https://ebay.us/m/rrB50G .
My plan is to add an temperature switch (arduino or a temperature control pcb) so that the fan is only running if needed.
I used 140mm fans P14 from Arctic. They are very silent and start spinning at 2.1V. If supplied with a 5V USB PSU they are nearly not audible. https://www.arctic.de/P14/ACFAN00123A
This is sill under development :)
04.10.2026
Added a simple version optimized for 3d print, instead of CnC or laser cutter. The print optimized middle section can be printed in one piece and is enough to connect two fans. If you need a cover for the bottom of a middle section to hide some cables etc., print the "print optimized bottom". I also added a slicer project for 5 fans, consisting of two USB end caps, middle sections and bottom covers.