Eurorack Cable Holder w/Bin for Arturia RackBrute Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach this item to your Arturia case for convenient cable and bits storage.
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Standard Digital File License
I designed this cable holder to attach to the top of an Arturia RackBrute Eurorack case. It grasps the front and back edges of the case for stability and has a small bin for storing accessories. Cables up to 16" can dangle behind the case. The 19 slots can each accommodate 6 cables (assuming they're narrow like BoredBrain or LMNTL cables) for a total capacity of 114 cables.
This includes both v1 and v2 variants of the frame part. The v1 model has a simple front face, v2 adds a polygonal cutout to the front for visual interest (it may also help minimize warping with filaments containing silk or when using some textured print beds).
I use PrusaSlicer and use 0.2mm layers; for two-tone versions of this I usually change color after 16 layers. I print with 4 shells / perimeters for additional strength.
At 100% scale this will be a tight fit on your case. Lately I've been printing it scaled to 100.3% in Y/Z dimensions, 100% X. I print the bin at slightly less than 100% so it fits into the slot more easily (99.74% X, 99.22% Y to essentially shave off .4mm in both of those axes). The 3MF file has these adjustments made to the models.
Happy patching!