1 / 1
SawZall, Hacksaw, and Jigsaw Blade Holder — zdjęcie 1

SawZall, Hacksaw, and Jigsaw Blade Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Sawzall/Hacksaw blades (6 and 9 inch and longer), and Jigzaw blades organizer. 3-4 blades height.

Ocena
0 / 5
Polubienia
23
Pobrania
95
Wydruki
0
Wyświetlenia
674
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Public Domain

I just wanted to clean up my drawer. Organize your hacksaw blades (open holder on left, to allow this to print under 250mm), 9-inch and 6-inch sawzall blades (4 slots), and 14 slots for JigSaw blades. All are 10mm wide. The tall ones are 154mm and 136 mm, followed by the set of 6 that are 103mm tall. The bottom 5 showing the metal blades are 80 long. And the extra one to the right of those is 85 long.

I added long magnets to the underside of the base, which you can optionally do. 

In this update:

The print I uploaded is newer than the photo; I made the hacksaw blade area a  little taller, each width 10mm (the photo is 9mm). The 9-inch blades now completely fit into the slot. You can extrude this model to be taller to hold a few more blades. 

Printed at 0.30mm in PETG, with 25% infill (15% Gyroid is probably fine). It took 9 hours on my MK3S.

Tagi