SawZall, Hacksaw, and Jigsaw Blade Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Sawzall/Hacksaw blades (6 and 9 inch and longer), and Jigzaw blades organizer. 3-4 blades height.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 95
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I just wanted to clean up my drawer. Organize your hacksaw blades (open holder on left, to allow this to print under 250mm), 9-inch and 6-inch sawzall blades (4 slots), and 14 slots for JigSaw blades. All are 10mm wide. The tall ones are 154mm and 136 mm, followed by the set of 6 that are 103mm tall. The bottom 5 showing the metal blades are 80 long. And the extra one to the right of those is 85 long.
I added long magnets to the underside of the base, which you can optionally do.
In this update:
The print I uploaded is newer than the photo; I made the hacksaw blade area a little taller, each width 10mm (the photo is 9mm). The 9-inch blades now completely fit into the slot. You can extrude this model to be taller to hold a few more blades.
Printed at 0.30mm in PETG, with 25% infill (15% Gyroid is probably fine). It took 9 hours on my MK3S.