1 / 2
Fritzbox 6591 10 inch Rackmount with Keystone slots
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fritzbox 6591 10 inch Rackmount with Keystone slots
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fritzbox 6591 10 inch Rackmount with Keystone slots.
Use M3 screws for mounting the PCB of the Fritzbox. Several short pieces of transparent filament are used as light guides. The holes for these must be drilled to the correct size so that the filament can be held in place by friction (or glue can be used). IO-Blend is mounted with M4 screws.
The DECT-Antenna sticks out 1-2mm!!!
Print as separate bodies!
