Multimeter Stand for Uni-T UT123T

Stand for Uni-T UT123T multimeter and its accessories:

Sarcophagus stand with rear drawer (for storing the thermal probe and others stuff), probe and test tweezers holder (with a back pocket to store tweezers connectors) and hooks on the sides for holding cables...

Non-printing necessary accessories:
◦ M3 Heat-set nuts, outer diameter 5 mm x height 4 mm (6x)
◦ M3 10mm countersunk head screws (4x)
◦ M3 16mm countersunk head screws (2x)

Recommended Print Settings: 🖨⚙
◦ Material:                PLA, PETG
◦ Nozzle diameter:  0.6 mm
◦ Layer height:         0.3 mm
◦ Perimeters:            2 (with 0.4 nozzle use 3 perimeters)
◦ Infill:                       25%
◦ Print speed:          ~ 30 mm/s
◦ Print orientation:  As in STL files
◦ Support:                No


I also have a stand for the biger Uni-T multimeter UT60BT which you can find on Printables here: 
Multimeter Stand for Uni-T UT60BT


Assembling:

1. Prepare the Drawer: 
Insert two heat-set nuts into the rear grip hook and screw it together with the bottom stop hook to the drawer itself using 16 mm M3 screws:

2. Prepare the Stand: 
Insert four heat-set nuts into the multimeter stand and then screw in the two hooks using 10 mm M3 screws:

✔ Once you're done, you can equip the stand with your accessories: