1 / 7
Universal Wall Mount Adapter for Pole-Mount Devices
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Wall Mount Adapter for Pole-Mount Devices
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This universal pole-to-wall mount allows you to install any device originally designed for pole mounting directly onto a wall.
Ideal for outdoor access points, antennas, cameras, sensors, or any equipment that normally attaches to a round pole using clamps or brackets.
Features:
- Adjustable tilt angle for precise alignment
- Curved surface compatible with pole-style clamps or zip ties
- Mounting holes for wall screws or anchors
- Printed in two interlocking parts for increased strength while using minimal filament
- Solid, easy-to-print design optimized for PETG or ASA (recommended for outdoor use and UV resistance — do not use PLA)
Perfect for Wi-Fi bridge setups, surveillance systems, or any outdoor installation where a pole is not available.
I used mine to install a TP-Link CPE210E Wi-Fi extender with great results.
Hardware required:
- 1× M6 nut
- 1× M6×25 socket head screw (see pictures)
- 2–4 wall screws suitable for your surface (wood, drywall, brick, etc.) — I used Fischer 6 mm wall anchors