H2D toolhead mounted PTFE tube holder with ECAS coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PTFE tube holder that uses a ECAS04 coupler for printing TPU on the Bambu Lab H2D
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Alternative version of the model made by Viva la vida
A toolhead mounted holder for the H2D to keep an extra PTFE tube in place for TPU from the external spoolholder. This version uses a ECAS04 coupler to hold the PTFE tube, simply remove the rubber piece on the bottom and push it in place.
Several versions of the design are added for download, while the tube stays inside the coupler it was the coupler that came loose from the mount during fast movements and hot chamber temps. Now it can be secured with an BHCS M3x6 screw and a M3 heatset or hex nut.
Best printed with ABS/ASA or similar for better high temperature resistance.