FormFutura refill to Bambu Spool Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount FormFutura Refill spools on Bambu Lab holders – see video.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
FormFutura Refill → Bambu Adapter
This adapter allows you to mount FormFutura Refill spools onto Bambu Lab spool holders —
perfect for mixing materials and keeping your filament setup consistent.
What started as a simple idea turned out to be a real challenge —
especially regarding tolerances, symmetry, and mechanical strength.
After several iterations, this version offers a tight but reliable fit.
Attention for S1/ACE:
If this combination is used in ACE, there will be a collision in newer ACE versions — the lid can no longer be closed. Check the Video at 0:56 min.
Disclaimer / Liability Notice
All files provided by Zravel are offered “as is” and without any warranty.
Use and printing are entirely at your own risk.
Zravel and its creators are not liable for any damage, injury, or loss arising from the download, modification, or use of these files — including but not limited to:
– personal injury from printed objects,
– mechanical failure or part breakage,
– or any indirect or consequential damages.
These designs are provided for personal, non-commercial use unless stated otherwise.
Before printing, always check each model for strength, stability and suitability for your intended purpose.
Use responsibly and at your own discretion.