1 / 6
Zebralight Flashlight SC60 Bikelight Shade Clip - v3.0 - parametric — zdjęcie 1
1 / 6

Zebralight Flashlight SC60 Bikelight Shade Clip - v3.0 - parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

acts as shade to prevent blinding of oncoming traffic, when using a zebralight SC60 (or other flashlight) as bike-light.

Ocena
0 / 5
Polubienia
7
Pobrania
5
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I like to use my Zebralight SC60 as bicycle-light, using a standard handle-bar to light clip. This way, I always have a good torch with me, when I get off the bike.

But a normal flashlight, will blind oncoming traffic.

This clip solves that problem, by providing a shade. Additionally, if printed from transparent PETG, other traffic can more easily spot you from the side.

 

 

Printing Recommendations

  • Seam Position: !! Back !! (or model may break when clipping on)
  • Nozzle Size: tested with 0.6mm and 0.8mm. Should be fine with 0.4mm as well
  • Layer height: up to 0.32mm
  • Material: transparent PETG recommended
  • Infill: 0%
  • Support: none
  • Brim: useful! Depending on your printbed you may be able to do without.

Update: Version v3.0

  • completely reworked in FreeCAD 1.1
  • better fit
  • tighter hold of clip
  • hole for cooling draft
  • cut-out for torch's belt/bag-clip

Tagi