1 / 6
Zebralight Flashlight SC60 Bikelight Shade Clip - v3.0 - parametric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
acts as shade to prevent blinding of oncoming traffic, when using a zebralight SC60 (or other flashlight) as bike-light.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 5
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I like to use my Zebralight SC60 as bicycle-light, using a standard handle-bar to light clip. This way, I always have a good torch with me, when I get off the bike.

But a normal flashlight, will blind oncoming traffic.
This clip solves that problem, by providing a shade. Additionally, if printed from transparent PETG, other traffic can more easily spot you from the side.
Printing Recommendations
- Seam Position: !! Back !! (or model may break when clipping on)
- Nozzle Size: tested with 0.6mm and 0.8mm. Should be fine with 0.4mm as well
- Layer height: up to 0.32mm
- Material: transparent PETG recommended
- Infill: 0%
- Support: none
- Brim: useful! Depending on your printbed you may be able to do without.
Update: Version v3.0
- completely reworked in FreeCAD 1.1
- better fit
- tighter hold of clip
- hole for cooling draft
- cut-out for torch's belt/bag-clip