Outlet cover for round plug, baby proof
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
outlet cover for baby proofing single plug, instead of having a massive outlet cover
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 215
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My daughter WOULD NOT stop messing with the plug for the TV, and it is located in a very conspicuous spot. All other options for baby proofing or outlet covers are massive, bulky and ugly. The wire coming off of the plug for the TV is also protruding out of the corner, whereas almost no options account for that being an option. Decided to make my own solution. It is not fancy , it isn't perfect, but it works.
I printed this standing up to have the layer lines across the longer faces, to avoid my toddler pulling it apart so easily.
Printed in PLA , layer height was 0.2.
The dimensions of the plug in question is 1.237" diameter, and 0.975" tall. The inner diameter of the half circle in the file is 1.30", and the inner height is 1.0".
I did need a longer screw to fix this to the outlet, it was a #6-32 x ¾ inch oval head Phillips. I attached a picture of the package I found at home depot for this exact size machine screw.