Flip pocket cartridge case for Nintendo 3DS games
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case that holds 12 DS or 3DS game cartridges.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this case to hold the game cartridges securely in place when the case is closed. When the case is open, the games are easy to take and return.
The case is roughly the same size as a Nintento 3DS XL.
Print Tips
Nozzle 0.4 mm
Layer height: 0.15 mm
3 perimeters
infill: 15% rectilinear
The lips of the flip pockets need support. Add support enforcer 3ds-flip_support_enforcer. Select supports for support enforcers only.
If you use a non soluble support filament (like PET), set 0.6 mm XY separation between an object and its support.
The support will be more or less one squiggly wall. If it doesn't stick to the case properly, you can set bottom interface layer = 1
I have tried to print the case with breakaway supports. It worked but required some more clean-up.
Optional front side text
Download the front text model files.
Add the text modifiers from and assign text extruders to them.
Add the 3ds-flip_solids_above_text modifier and add Setting "Bottom solid layers": 7
This is to get two solid layers on top of the letters.
I used these filaments
add:north PLA Premium Silk blue/red/silver
Prusament PLA Jet Black
BASF Ultrafuse PET (for support)
Post Print Processing
Wiggle the hinges smooth.
Remove the supports with a pair of pliers.
Stands
I have made two stands for the flip pocket case. They may be useful.
Shelf stand. Holds up to four cases.
Desk stand. Used when you want to quickly switch between games.