Motion Detecting LED Lighting for 3D Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Directionally mounted Passive Infrared Sensor incorporating motion detection with 3D Printer LED lighting setups
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This design was created to incorporate a movement detector for LED lighting so that any LED lighting installed on a 3D Printer is only activated when either the print bed is moving or movement is detected beneath.
This design incorporates a '12V Passive Infrared Sensor' which can be bought from the following link
https://www.aliexpress.com/item/1005008589497175.html
The design has been made to have directional sighting for the PIR Sensor so that it is not omnidirectional but rather focussed on the print bed with the print being in two parts, one being a downwards directional sight and the other being a custom designed rail mount fitting for 2020 extrusion to be fitted at the top of the printer.
This design should suit most 3D Printer brands and LED Light modifications however the example shown was made specifically for my 'Ender 3 Max'.
Videos of operation:
https://youtube.com/shorts/Vgmx0wZ9oy4
https://youtube.com/shorts/98hvzqkjDqE
Included STLs are:
PIR LED Light Sensor Directionally Mounted Downwards Sight
PIR LED Light Sensor Top Rail Mount
Supports are recommended.