1 / 5
Knoll Bertoia Chair Foot (Or foot for chairs with tubing feet/legs) — zdjęcie 1
1 / 5

Knoll Bertoia Chair Foot (Or foot for chairs with tubing feet/legs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet for the Bertoia chair that dont roll over, or for other chairs with tubing paralell to the floor.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

My friend has this chair, but the clip-on plastic fet kept rolling over as they moved the chair and the feet caught on the floor. (photos of the old feet and the new feet- notice the spiral cut)

I took a gear shape and extruded it, so that the feet can roll over the tubing and keep the legs at a constant distance from the floor. 

Printed in TPU 95A at 20% gyroid infill 

TO FINISH: take a sharp, fine knife (X-acto, utility, pocket knife etc.) and cut a spiral cut through one side of  the foot, wrapping the cut down the piece as you rotate it. To install, wrap the foot onto the tubing.  

Future designs could integrate the spiral cut design. 

Tagi