1 / 5
Knoll Bertoia Chair Foot (Or foot for chairs with tubing feet/legs) — image 1
1 / 5

Knoll Bertoia Chair Foot (Or foot for chairs with tubing feet/legs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Feet for the Bertoia chair that dont roll over, or for other chairs with tubing paralell to the floor.

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

My friend has this chair, but the clip-on plastic fet kept rolling over as they moved the chair and the feet caught on the floor. (photos of the old feet and the new feet- notice the spiral cut)

I took a gear shape and extruded it, so that the feet can roll over the tubing and keep the legs at a constant distance from the floor. 

Printed in TPU 95A at 20% gyroid infill 

TO FINISH: take a sharp, fine knife (X-acto, utility, pocket knife etc.) and cut a spiral cut through one side of  the foot, wrapping the cut down the piece as you rotate it. To install, wrap the foot onto the tubing.  

Future designs could integrate the spiral cut design. 

Tags