Launch Rod Holder For Model Rockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Launch rod holder for model rockets. Design based off the Estes launch pad rod holding mechanism.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Use M5-.80 X 25 hex cap bolt with wing nut and washer
Designed for all launch rod sizes (1/8", 3/16", and 1/4")
One that handles 1/8" and 3/16" rod like the Estes launch pad and another for the larger 1/4" rod. I purchased my rods from Lowes.
Base part designed to be screwed into wooden frame for stability.
I also use dollar store metal pizza pans as blast deflectors. The area is large enough to protect 3D printed parts and whatever frame they are fixed to.
Update to outer.stl, now OuterFix.stl. Increased width of clip to have tighter fit with base