Liczymy pasujące modele…
I recreated the popular Estes “Swift” model rocket! Printed in PLA and attached with Testors plastic model cement. The total print time is only 1 hour! I recommend printing everything except the fins with a brim to help with bed adhesion…
Dieses Modell ist im Massstab 1:24 und ist ideal für Resin Druck
Dieses Modell ist im Massstab 1:24 und ist ideal für Resin Druck
This is my take, or attempt, at making a Drow Spider Priestess Statue. I have scaled this at 200%. Feel free to scale it to your desired height.
This is one of many model's/statues i have created in blender for a project i am working on. Uploaded here because i don't think it will be using this one in my project and someone might get some use out of it. Although i did not 3D print…
These spacer tools replace the cardboard spacer tube that typically comes with the Estes kits. The tube is used to position the engine block when glued inside the engine tube. These reusable spacing tools have a base that will stop the…
Modeled after the original with some body contours adjusted. I printed in silk PLA and transparent PLA. The silk was a little loose and the other very snug with the same settings. I enlarged the ID 0.4mm. Whatever you do, don't force it…
I built Estes rockets when I was young. Recently I designed and 3D printed half-scale versions of all the rocket I had. I decided to add a display of the A, B, C, and D engines including a cut-away. The nameplate is printed separately so…
An adapter for Estes Rockets to lower the engine size from a E to a D.
mini model rocket based off of the estes mosquito and uses a10-3t engines or any other ini engines
Files to print wing structures which are very similar to the original Estes Pegasus #0806 model rocket. The single wing is sized to the original. The scaled and mirrored wings are for direct attachment to a BT-5 body tube without an…
This is my take, or attempt, at making a Drow Spider Priestess Statue. I have scaled this at 200%. Feel free to scale it to your desired height.
This is my take, or attempt, at making an Elvin Moon Priestess. I have scaled this at 200%. Feel free to scale it to your desired height.
This is my take, or attempt at a Fantasy Fairy Statue. I have this model scaled at 200%. Feel free to scale it to your desired height.
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
Dieses Modell ist im Massstab 1:24 und ist ideal für Resin Druck
this model rocket holder is made for the Olympus style model rocket by Estes as seen in the pictures you put it right below or on the cargo hold
What makes it even better is the source design in FreeCAD :P Print in PETG or ABS/ASA. Category: 3D Printer Accessories
This is a simple thrust ring, designed to slip onto the end of an Estes 29mm motor. I don't normally fly Estes BP motors, but when I do, I have to use the tape method because I do not put thrust rings in my motor mount tubes. Ever. This…
TESA Brown & Sharpe Dial Test Indicator .0005" bestest 7030-5 Gridfinity Bin 1x2 grid bin, stackable even when full. Easy to remove and keeps the indicator safe when in storage.
Brown & Sharpe BesTest Dial Test Indicator 599-7033-3 0.00005" Graduation, 1-1/2" Dial gridfinity bin, Large 2x3 grid bin. Lots of space for tip, and fixturing storage. Stackable even while full. If you want a small compact storage for…
Brown & Sharpe BesTest Dial Test Indicator 599-7033-3 0.00005" Graduation, 1-1/2" Dial gridfinity bin Small 1x2 grid bin. Stackable even while full. If you want a larger storage bin for this same indicator, check here. It will allow you…
Estes Model Rocket Blast Deflector Plate Spacer Standoff
I printed the original version of this model and I liked it, but I wanted magnets on the bottom to help it stay put in the drawer. While I was at it, I trimmed off the raised sections that would allow more gridfinity bins to be stacked on…
Hi. This Is a work in progress but very close to perfect. I have tested all the parts. All parts fit from a little filing to filing all the overprinted corners of the center part as my printer make big corners that has to be filed off…
Step into the sacred temple of intuition and mystery with this faithful 3D recreation of the Boaz and Jachin Columns from the High Priestess Tarot card. Symbolizing balance, duality, and the gateway to hidden knowledge, these iconic…
We had a broken adjustment buckle for the strap of a messenger bag. This was designed in FreeCAD as a replacement, and I think it is very proud to be doing the best buckle job in the world by the looks of it. Print this with 100% infill…
mini model rocket based off of the estes mosquito and uses a10-3t engines or any other ini engines
Ein wetterfestes Gehäuse für Sensoren auf Basis des WISKA KA 012 Gehäuses. https://www.pollin.de/media/49/8d/b8/1701717617/D553881-D.pdf Durch die Integration von Luftein- und Auslässen bleibt das Gehäuse weitestgehend wetterfest und…
5 x 3 Gridfinity box to store Estes rocket engines. Stores: 25 x 18mm Engines 12 x 24mm Engines Generated using the https://gridfinitygenerator.com/
Estes' bulk packs of model rockets are great, but having them all the same design limits opportunities to explore different fin profiles and makes them hard to tell apart. The Estes Orbis pack offers the opportunity to “grow your own…
Originally made for ESTES-style rockets, each jig supports a different body tube diameter and fin slot configuration. These tools ensure your fins stay aligned and evenly spaced while the glue dries – perfect for hobbyists who want…
Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Omega styled BT-60 fin cans for both 24 and 29 mm motors. The Estes Omega is a classic two stage rocket that was the standard booster for flying the Cineroc . These are designed to be strong and efficient - the fins use cross members so…
This is a model for a thrust ring that will fit flush on the aft end of an Estes BP motor. It is designed to replace the wraps of tape that are commonly used to create a thrust ring on the motor itself, and mimics the thrust rings…
This is a model for a thrust ring that will fit flush on the aft end of an Estes BP motor. It is designed to replace the wraps of tape that are commonly used to create a thrust ring on the motor itself, and mimics the thrust rings…
Uploaded 06 Feb 2025: Need a replacement for your rocket cone. Estes does not sell this cone as a replacement, so make your own. Print with 0% infill and 1.5mm wall thickness and then Bobs your Uncle! Specs: 1.14" ID body tube (29mm)…
A cylindrical adapter that allows you to place an Estes rocket (minus the nose cone) with the flamey end up for demonstration firing.
These parts all fit the carboard tube inside a Reynolds brand parchment paper tube. Motor is retained with a cap that fits in a cam/interrupted thread block. Tube for launch guide rod integrated into the body of the fins. Print 10% infill…
A print to hold the Estes Viking horizontal. The file with text has “VIKING” written on the side, the file without text does not. Print Settings -- Walls - 3 Infill - 10% Brim - No Supports - No
add support blockers into the taller piece of the body, supports will get stuck.
Real prints above (As always) Scaled for 28–32mm play , but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08 mm layer height. eSun PLA+ Supports: minimal; model is pre-posed with strong base…
A 3D printable elf priestess framed by a radiant sunburst carved into her cloak, the rays merging with the pedestal. The sunburst provides both stability and visual drama. Model was tested in Orca Slicer for printability. Just scale it up…
This is a 3d model of the Estes Crossfire. The Crossfire is supposed to fly up to 350 meters on a c6-5, in reality it only flies up to around 255 meters. The 3d printed version is a mono body design, meaning that the fins, motor mount,…
This is a small Estes rocket that I made for my little cousin. You can use an A, B or C size rocket motor
The Estes fin alignment guide is a tool that I use quite often here in the AAEN Fabrication Shop. It comes with three cardboard motor casings. They are 13mm, 18mm and 24mm in diameter. Due to the cardboard casing I have run into issues…
big to small size Estes launch tube adapter this worked on mine very well and it takes only a few minuets to print
Modeled with an insertion diameter of 26.4mm. I printed 0.20mm layer silk PLA which ended up with a an actual diameter of about 26.05mm for a slightly loose fit matching the original nose cone. Depending on your fit, you might find XY…
This is a digital 3D printable model of the Priestess' staff from Goblin Slayer. 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) All cut parts are placed on the print bed just as we would print…
Files to print wing structures which are very similar to the original Estes Pegasus #0806 model rocket. The single wing is sized to the original. The scaled and mirrored wings are for direct attachment to a BT-5 body tube without an…
This Jaguar Priestess Bust represents a powerful spiritual leader connected to ancient tribal traditions and animal spirits. Wearing a striking jaguar mask and a crown of crystalline feathers, the priestess embodies the strength and…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
This is my take, or attempt, at making an Elvin Moon Priestess. I have scaled this at 200%. Feel free to scale it to your desired height.
This is my take, or attempt at a Fantasy Fairy Statue. I have this model scaled at 200%. Feel free to scale it to your desired height.
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
this model rocket holder is made for the Olympus style model rocket by Estes as seen in the pictures you put it right below or on the cargo hold
This is one of many model's/statues i have created in blender for a project i am working on. Uploaded here because i don't think it will be using this one in my project and someone might get some use out of it. Although i did not 3D print…
A model rocket display stand for a rocket you just launched into space
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical…
For the BT-50, 25 mm was a bit to snug but worked. Trying 25.4 mm for the next print. 25.4 is a perfect fit for the BT-50 Tube
Celestial Moon Priestess, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Siren Ocean Priestess, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Hephaestes 38 Hephaestes38 is a custom, 38 key, low profile, split unibody keyboard. I Intended it to be used with the Hands Down promethium layout, but that's really up to you! ZMK studio has also been integrated, so it's super easy to…
3003 Fantasy Bits Mega STL Collection on Kickstarter A graceful moon priestess with crescent staff, designed for temples, spellcasters, and fantasy NPCs. This model is made for fantasy tabletop games, RPG campaigns, wargaming encounters,…
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Voidweb Priestess 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Voidweb Priestess is a sinister and…
A compact, 3D-printed two-stage model rocket designed for classic Estes-style motors. This build uses a C6-0 booster stage to kick off with a strong initial boost, followed by a B6-4 upper stage for a smooth second burn and parachute…
Blessed by the Light. Dressed by questionable decisions. Sacred Temptation is a high-detail adult fantasy priestess combining divine elegance, ornate holy armor, a ceremonial staff, and enough confident presence to make concentrating…
She says she’s praying. The pose is raising questions. Holy on Her Knees is a high-detail adult fantasy priestess combining divine elegance, ornate cleric styling, a ceremonial staff, and a kneeling pose that makes her interpretation of…
This is the 5th iteration of a rocket design. I wanted a small fully printed rocket to launch for the 4th of July. I designed it in tinkercad and it is designed for 18mm x 70mm Estes rocket motors. Prints in 4 parts. Its super simple to…
This camera housing is designed to house the Estes Atrocam. There are 3 variations available in this download: 38/54mm, 3in and 4in diameters. This is an easy way to quickly attach a wonderful little camera to your rocket. Recommend…
Rocket with a parachute chamber compatible with standard Estes 18 mm rocket engines. Send a video from the flight! Category: Vehicles
Replacement Nose Cone for the Estes Mean Machine Model Rocket
Replacement Nose Coen for the Estes Vapor Model Rocket
These are the scaled plastic parts for the Larger Estes Interceptor K-50 E Model rocket. Category: Models
This nosecone was a online request.... Mega Der Red Max Nosecone The nose cone is 16.5" / 420mm from the tip to the shoulder. Made to mount on 4" diameter body tubes Category: Hobby
ESTES INTERCEPTOR K-50 ROCKET PLASTIC PARTS Nosecone (PNC-55EJ), tail nozzle (PTC-55EJ), and wing pod halves (PWP-EJ).. These are for the original Interceptor, not the E model which is larger.. Use some 1.75 dia filament to join the pod…
Designed plastic parts for the Estes Rocket Outlander #2110 Modified the tail cone to allow the modification for a 24mm D engine mount tube. Category: Models
Created the PNC-55D estes nose cone used on the following rockets numbers 0816 Wolverine 1285 Teros 1311 Laser Torpedo 1901 Sea Dart 1930 Wasp 1958 Black Brant II 2015 Strike Fighter Category: Hobby
This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. The Estes #1301 R2-D2 model rocket is a cool model…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. I wasn't satisfied with the accuracy of some other models…
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is the nosecone for the Estes Der Big Red Max model…
