Estes Omega style fin cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are designed in the style of the Estes Omega rocket fins and can work with 24mm and 29mm motor tubes.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Omega styled BT-60 fin cans for both 24 and 29 mm motors.
The Estes Omega is a classic two stage rocket that was the standard booster for flying the Cineroc.
These are designed to be strong and efficient - the fins use cross members so no infill is needed when printing these.
They have slots in the motor tube section to allow for an engine clip.
I print them at .2mm layer height and they average about 2.5 oz each.
You need to print them with supports for both the fins and the center shelf.
---------
The fins have an internal structure for strength and don't require infill.
-----
Supports needed
