Estes Omega style fin cans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are designed in the style of the Estes Omega rocket fins and can work with 24mm and 29mm motor tubes.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 77
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Omega styled BT-60 fin cans for both 24 and 29 mm motors.
The Estes Omega is a classic two stage rocket that was the standard booster for flying the Cineroc.
These are designed to be strong and efficient - the fins use cross members so no infill is needed when printing these.
They have slots in the motor tube section to allow for an engine clip.
I print them at .2mm layer height and they average about 2.5 oz each.
You need to print them with supports for both the fins and the center shelf.
---------
The fins have an internal structure for strength and don't require infill.
-----
Supports needed
