Car Stand for 4 1:24 Cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've modeled this to store 1:24 scale car models... VERTICALLY! Adds a whole new dimension for storing them.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I recommend measuring your car models and comparing them to the print model before printing.
WARNING:
ONE PART TAKES THE ENTIRE PRINT BED ON MY ENDER 3 MAX NEO SO BE WARY.
The tolerances for the parts are pretty high (should be 0.4mm) as it doesn't need to be a tight fit but I recommend printing a single lift and pole before printing the rest.
Printing:
I printed them in PLA with 0.2mm layer lines, 10% gyroid infill, no supports, 3 perimeters and concentric top and bottom layers. All of these settings are of course up to your preferences.
Assembly:
Connect the poles to the lifts one at a time. That's it.