1 / 5
Foot for Hatch Grow Smart Changing Pad & Scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for the Hatch Grow. The feet are required for the scale to function properly.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- GNU General Public License v3.0
The Hatch Grow is a smart changing pad & scale. The scale works via pressure sensors in each of the 4 feet under the changing pad. Without these feet, the scale can't work. If the feet become damaged or lost, you can use this model to 3D print a replacement.
To install the feet…
- Remove the back panel.
- There are 22 x Philips panhead screw, plus 1 x Philips flathead screw to open the battery compartment to reveal another 2 x Philips flathead screw.
- Use a utility knife to cut any residual fins/flaps off of the grey plastic piece, which used to retain the old foot.
- Place the 3D-printed foot on the metal pressure sensor.
- Re-install the back panel.
- The replacement foot has a lip which will prevent it from falling out of the unit after you re-install the back panel.