1 / 5
Foot for Hatch Grow Smart Changing Pad & Scale
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement foot for the Hatch Grow. The feet are required for the scale to function properly.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- GNU General Public License v3.0
The Hatch Grow is a smart changing pad & scale. The scale works via pressure sensors in each of the 4 feet under the changing pad. Without these feet, the scale can't work. If the feet become damaged or lost, you can use this model to 3D print a replacement.
To install the feet…
- Remove the back panel.
- There are 22 x Philips panhead screw, plus 1 x Philips flathead screw to open the battery compartment to reveal another 2 x Philips flathead screw.
- Use a utility knife to cut any residual fins/flaps off of the grey plastic piece, which used to retain the old foot.
- Place the 3D-printed foot on the metal pressure sensor.
- Re-install the back panel.
- The replacement foot has a lip which will prevent it from falling out of the unit after you re-install the back panel.